deltaunited
Select :  
    中文
 
9001
         
  New and old models  
  New models Old models  
  DU-2316/-2317 DU-2310/2311
  DU-5210/5211 DU-5010/5011
    DU-5110/5111
  DU-6215/6216 DU-6021/6022
  DU-6212 DU-6015
  DU-6211 DU-6010/6011
    DU-6000
  DU-7210 DU-7010
  DU-7211 DU-7011
  DU-7216/7218 DU-7112
  DU-9001 DU-9000
 
 
 
 
 
 
 
 
7216
Test Item
Transformer Tester
 Inductance, Q factor, Leakage Inductance, AC Resistance, Capacitance, DC Resistance, Balance,
 Turn ratio, Open/Short check
Feature
Advance Technology
 Used high speed CPU & A/D with ARM system, provide high speed data calculation
High Quality
 ■ With ISO9001 & CMC certifications in our factory
 ■ Fully Used SMD component, provided high quality product to you
 ■ All main components in international famous brand
Relay
 ■ Using high speed response miniature relays imported form Japan, provide long MTBF
 ■ DU7200 series provided self-scan function in relay & scanning box, easy to maintain
DC Bias (Current)
 Built-in 1~1000mA programmable DC Bias in current
Easy to use
 User friendly interface, guiding software with 8 soft key, easy to input test setup data.
 With English/Chinese language display interface. Text and background color change allow as you need.
Fully Automation Support
 ■ Built-in handler interface, easy to control when you setup automation tes system
 ■ Built-in RS-232C port and provide PC software to collect test data to analysis, easy to exchange to MS
  Excel data format
 ■ Independent Scan I/O signal Provide 4 sets independent PASS/FAIL signal, easy to control for judgement
One page show
 DU7200 series provide 800*600 colorful LCD display screen, you can read test data in one page Older tester
 used 320*240 small screen, when you setup test data or read test result, you need change page over and over
 again, difficult to learn and operating. And, it was limited under 4 sets primary coil.
 DU7200 series using coil winding in basic unit when setup, no more primary coil sets limit, and show all test  result data in one page screen(100 test data in one page), with in 800*600 color display, you can easier to setup  test data and mark failure item(s).
USB firmware Upgrade
 DU7200 series provided the USB upgrade for firmware, no cover open, no tool, just USB drive, saving
  maintenance cost and increase effective.Via Internet, our R&D team always stand by your side.

Specification
Model DU-7216 DU-7218
Test Item Turn Ratio、L、Q、Leakage L、ACR、Cp、
DCR、Zx、Pin Short、Balance
Test Voltage Turn Ratio : 0.1V ~ 10V, ±10%, Resolution : 100mV ±5%
Other : 0.01V ~ 2.5V,±10%, Resolution : 100mV ±5%
Test Frequency Turn Ratio : 1KHz ~ 200KHz,±0.02%
Other : 20Hz ~ 200KHz,±0.02%
Internal  Impedance Turn Ratio : 10Ω , ±5% , when level < 2V ,
---------------- 50Ω , ±5% , when level > 2V
Other :
Mode 1… 100Ω, ±5%
Mode 2…Varies as range resistor,±5%
Display Range L、LK : 0.0001 μH ~ 1999.9H
C : 0.0001 pF ~ 199.99 mF
Q : 0.01 ~ 1999.9
Z、R : 0.0001 Ω ~ 99.999 MΩ
DCR : 0.01 mΩ ~ 99.999 MΩ
Pin Short : 4 ports, each port 11 pairs, between pin to pin
Turn : 0.01 ~ 1999.9 turns (Secondary voltage less than 100Vrms)
Test accuracy Turn Ratio / DCR : ± 0.5% , at 1KHz Basic
L / C / R : ± 0.1%(at 1KHz/1V Basic)
Test Speed Fast: 20ms , Medium: 100ms , Slow:500ms
Judgment

PASS / FAIL judgment of all test parameters
PASS/FAIL judgment output from standardI/O interface

Display screen 8 inch 800 x 600 dot-matrix TFT LCD display
Memory INT. : 100 memory EXT. : USB 400memory.
Internal DC Bias Current
Built-in 1~1000 mA programmable DC Bias in current
HANDLER Standard handler interface included
RS232 RS-232C interface included
Correction Open / Short zeroing, Load correction, Load calibration
Others torage: Temperature :0℃ ~ 40℃、Humidity :10% ~ 90% RH
Power Consumption: >100 VA max.
Power Requirement: 100 ~ 120 Vac / 198 ~ 242 Vac, 48 ~ 62Hz
Dimension: Approx. 9 kg
Weight: (WxHxD) : 380 x 170 x 360 mm

Multi point transformer integrated test system (FILTER RJ-45/LINE, etc.)
Model
DU-7216
DU-7217
DU-7218
DU-7219
Description 20~80 pins High Speed Scanning Tester, step 20 pins add-on 24~96 pins High Speed Scanning Tester, step 24 pins add-on,
Scan box With DU-7007 scan box With DU-7008 scan box
LCR meter function NO YES NO YES
Model
DU-7007
DU-7008
Test point DU7007-1 20 pins
DU7007-2 40 pins
DU7007-3 60 pins
DU7007-4 80 pins
DU7008-1 24 pins
DU7008-2 48 pins
DU7008-3 72 pins
DU7008-4 96 pins
Contact 4 – terminal contact
Trigger Remote control START/STOP, Foot Swiech Control START
Indicator PASS / FAIL
Signal PASS / FAIL
Weight Approx. 3.5kg
Dimension Dimension (WxHxD) : 270 x 130 x 240 mm

Exterior

 DU-7007

DU-7008

Order Information
DU-7216
High-speed LAN/RJ-45 Filter Test System ( 20~80 pins)
DU-7007 Extendable Scan Box 20Ch Std
DU-7218 High-speed LAN/RJ-45 Filter Test System (24-96pins)
DU-7008
24 pins Transformer Scan Test Box
Standard Fittings
Fx72-0101
Turn Ratio Test clips
Fx72-0501
Foot control switch
Optional Accessories
Fx72-ES-20
20 pins extendable scanning board
Fx72-ES-24 20 pins extendable scanning board
Fx72-0501
Foot control switch
Fx72-0101
Fx72-0501
Fx72-ES-20    
     
 
 
  Delta United Instrument Co.,Ltd.
3F, NO. 504, Jong-Jeng Rd., Xindian Dist, New Taipei City, Taiwan.R. O. C.
Tel:886-2-86673545 Fax:886-2-86673546
sales@deltaunited.com.tw
DONGGUAN DELTA UNITED INSTRUMENT CO., LTD.
3F, No. 68, Chung-Huan Middle Rd., Shijie Town, Dongguan, Guangdong, P. R. C.
Tel:86-769-86317345  Fax:86-769-86317346
sam@deltaunited.cn